Caterpillar (CAT) 950F Series II. Crane Specifications, Load Charts, and Crane Manuals are for.Reference Only. and are not to be used by the crane operator to operate any type of crane, telehandler, lift truck or aerial access device. To obtain OEM Crane Service, Crane Parts or Crane Maintenance Manuals, contact the crane and or lifting. Wheel loader Caterpillar 950F Service manual: CAT25-184: 950F II: Wheel loader Caterpillar 950F Series 2 Spare parts catalog: CAT25-185: 950F II: Wheel loader Caterpillar 950F Series 2 Operation and maintenance manual: CAT25-186: 950F II: Wheel loader Caterpillar 950F Series 2 Service manual.
Usage:
950F II966G Series II Wheel Loader and 972G Series II Wheel Loader Braking System Brake Control Valve (Parking) 950F Series II Wheel Loader Engine Starting with Air Inlet Heater 950F Series II Wheel Loader Engine Starting with Ether Starting Aid - If Equipped.
2LMNOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, 'Caterpillar Tools and Shop Products Guide' for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Illustration 1 | g00813398 |
The hydraulic oil filters are located in the hydraulic oil tank. The hydraulic oil tank is located behind the platform on the right side of the machine.
- Remove the three bolts (2) and swing the platform (1) away from the machine.
- Remove the four bolts (3) from each of the covers (4). Remove both of the covers.
- Remove the filter elements. Discard the old elements.
- Clean the covers. Inspect the condition of the seals. Replace the seals, if necessary.
- Install new filter elements and install the covers. Tighten the bolts to
58 ± 4 N·m (42.8 ± 2.9 lb ft) . - Check the level of the hydraulic oil tank. Add oil, if necessary.
- Close the platform and install the three bolts.
Usage:
950F II2LMInstrument Panel and Pedals
Illustration 1 | g00813403 |
(1) Display Modules (2) Warning Categories (3) Indicators (4) Heating and Air Conditioning Control (5) Service Brake Pedal and Transmission Neutralizer (6) Service Brake Control (7) Throttle Control |
Switch Panel
Caterpillar 950f Service Manual Pdf
Illustration 2 | g00808611 |
Computerized Monitoring System (If Equipped) (8) Postheat Cycle (9) Ride Control (10) Transmission Neutralizer (11) Ether Starting Aid (12) Rotating Beacon (13) Roading Lights and Cab Interior Lights (14) Front Floodlights and Rear Floodlights (15) Autoshift (16) Implement Kickout (17) Engine Start Switch (18) Circuit Breakers (19) Lighter (20) Windshield Wiper/Washer Switches (21) Fuses |
Caterpillar 950f Series Ii Parts Manual Transmission
Illustration 3 | g00812012 |
Caterpillar Monitoring System (If Equipped) (8) Postheat Cycle (9) Ride Control (10) Transmission Neutralizer (11) Ether Starting Aid (12) Rotating Beacon (13) Roading Lights and Cab Interior Lights (14) Front Floodlights and Rear Floodlights (15) Autoshift (16) Implement Kickout (17) Engine Start Switch (18) Circuit Breakers (19) Lighter (20) Windshield Wiper/Washer Switches (21) Fuses (22) Operator Switch for the Display Module (23) Traction Control System (24) 'Store' (PCS) (25) 'Reweigh' (PCS) (26) Rear Defroster (27) Return Kickout (If Equipped) (28) Diverter Valve |
Steering Column
Caterpillar 950f Transmission
Illustration 4 | g00813179 |
(29) Steering Control (30) Horn (31) Transmission Control (32) Steering Column Tilt Control |